A HORIZONTAL 2-D HYDRAULIC NUMERICAL MODEL AND IT’S APPLICATIONS TO FLOOD FORECAST     

Minghui YU  Guolu YANG  Jinjun XU 《国际泥沙研究》2002,17(3)

1 INTRODUCTION There were many flood disasters in China in recent years. When the water level in a river is very high, weak parts of its dike may be destroyed resulted in the submersion of the protected land and properties. It is of significance for decision-makers to exactly predict the processes of flood propagation during flood control. There are many modes of dike bursting, such as seepage destroying by overflow on top of dike caused by dike body sinking induced by piping and soil fl…  相似文献   

Models of passive margin inversion: implications for the Rhenohercynian fold-and-thrust belt, Belgium and Germany     

Y Vanbrabant  J Braun 《Earth and Planetary Science Letters》2002,202(1):15-29

Positive tectonic inversion is related to the transmission of compressional stresses along a décollement into the foreland of an orogenic zone. This stress and strain concentration in regions remote from the main orogenic front is commonly related to the presence of pre-existing rheological heterogeneities such as normal syn-depositional faults. During inversion, these pre-existing normal faults are reactivated as reverse faults. Tectonic inversion in the Rhenohercynian fold-and-thrust belt during the Variscan Orogeny shows that inversion is likely synchronous with the onset of collision in the hinterland. Here, we present the results of a simplified thermo-mechanical model (STM) which allows one to study strain partitioning between two orogenic zones. We show that, if the two orogenic zones have the same mechanical properties, the viscosity of the décollement, which links them, controls the initial strain partitioning. During subsequent finite shortening, erosional processes determine the partitioning of strain rate. The presence of a weak structure in the inverted zone and of a low-viscosity décollement leads to initial strain concentration in the inverted track rather than in the collision zone and a progressive decrease in strain partitioning between the two orogenic zones. The STM results are in good agreement with results of a 2D finite-element model. We conclude that, in the western part of the Rhenohercynian Massif, simultaneous uplift and deformation within the Mid-German Crystalline Rise (the main collision zone) and the Ardenne Anticlinorium (the inverted zone) lead to interpreting this orogenic event as a case of vice tectonic rather than the propagation of a ‘wave of folding’ towards the Variscan front, as suggested by previous authors.  相似文献   

Alpujarride attribution of the supposed ‘Almagride Complex’ (Betic Internal Zone,Almerı́a Province,Spain)Appartenance Alpujarride du prétendu « Complexe almagride » (Zones internes bétiques,province d'Almeria,Espagne)     

Carlos Sanz de Galdeano  Francisco J Garcı́a Tortosa 《Comptes Rendus Geoscience》2002,334(5):355-362

The differentiation of units in the Sierra de Almagro has been a source of controversy. There were defined the Almagride and Ballabona–Cucharón complexes, the former considered by several authors as part of a Subbetic metamorphosed and outcropping in a tectonic window. In this study, the units of Ballabona, Almagro and Cucharón are integrated into a single one, that of Tres Pacos, because they correspond to different parts of the same stratigraphic series. This unit is tectonically over the Nevado–Filabride Complex. The existence of the Almagride and Ballabona–Cucharón complexes is discarded and their units form part of the Alpujarride Complex. To cite this article: C. Sanz de Galdeano, F.J. Garc??a Tortosa, C. R. Geoscience 334 (2002) 355–362.  相似文献   

某高层建筑刚性桩复合地基设计分析     

欧名星 《湖南地质》2003,22(2):139-142

根据当地工程地质条件，结合工程结构特点和当地施工技术水平，高层建筑软弱地基采用刚性桩和褥垫层处理，形成复合地基，是—种安全、经济的方法，施工难度小，能充分发挥桩和桩间土的承载力．本文分析了刚性桩桩顶设置粒状材料褥垫层后的桩土变形协调原理，桩和桩间土共同承载荷载的受力机制，复合地基的承载力设计和变形计算方法．提出了复合地基的桩和褥垫层施工质量要求．  相似文献   

小松山超基性杂岩体橄榄石的岩组分析     

赵东宏 《陕西地质》2003,21(2):45-48

沿贺兰山台褶带北部西缘深大断裂带分布的小松山超基性杂岩体属岩浆结晶分异形成的似层状含铬岩体，岩组分析表明岩体中橄榄石具有高度的定向性。笔者通过研究认为，这种定向性系岩浆上侵过程中的流动分异作用影响造成，反映了小松山岩体系构造动荡环境下的产物。  相似文献   

中国东部苏鲁榴辉岩超基性岩褶皱带的演化及其与大别(中国)和柯切塔夫(哈萨克斯坦)杂岩的对比(英文)     

A.A.Marakushev  SANG Long-kang  A.V.Bobrov  ZHOU Han-wen  Liu Fu 《地学前缘》2003,10(3):277-289

苏鲁褶皱带形成于元古宙 (2 2 33～ 185 5Ma)典型优地槽构造环境 ,主要由石榴橄榄岩、石榴辉石岩、榴辉岩等侵入岩 (柯石英深度相地幔岩浆房中形成 )和它们的火山沉积建造围岩一起经褶皱、变质而形成。变质作用经历了先蓝片岩相 (前花岗岩 )后片麻岩混合岩相过程。由于变质作用的不规律性 ,苏鲁褶皱带可分为 2个构造带 :(1)东部构造带 (蓝片岩 )和 (2 )西部构造带 (片麻岩混合岩 )。根据A·都城秋穗所识别的变质带系统 ,可将其作为一个双变质带。东部构造带以出现许多块状、条带状榴辉岩辉石岩橄榄岩组合的残余岩块为特征 ,其中还残留着高压的矿物 (石榴石、绿辉石、柯石英 ) ,而且有被混合岩和各种交代岩替代的显著标志。在中生代 ,苏鲁元古褶皱带受造山作用的影响活化 ,导致许多花岗岩体的侵入 ,使交代岩广泛发育。  相似文献   

Flexural subsidence by 29 Ma on the NE edge of Tibet from the magnetostratigraphy of Linxia Basin, China   总被引：43，自引：0，他引：43  

Xiaomin Fang  Carmala Garzione  Rob Van der Voo  Jijun Li  Majie Fan 《Earth and Planetary Science Letters》2003,210(3-4):545-560

This study provides a detailed magnetostratigraphic record of subsidence in the Linxia Basin, documenting a 27 Myr long sedimentary record from the northeastern edge of the Tibetan Plateau. Deposition in the Linxia Basin began at 29 Ma and continued nearly uninterruptedly until 1.7 Ma. Increasing rates of subsidence between 29 and 6 Ma in the Linxia Basin suggest deposition in the foredeep portion of a flexural basin and constrain the timing of shortening in the northeastern margin of the plateau to Late Oligocene–Late Miocene time. By Late Miocene–Early Pliocene time, a decrease in subsidence rates in the Linxia Basin associated with thrust faulting and a 10° clockwise rotation in the basin indicates that the deformation front of the Tibetan plateau had propagated into the currently deforming region northeast of the plateau.  相似文献   

赣东北前震旦纪陆内叠加褶皱   总被引：3，自引：0，他引：3       下载免费PDF全文

章泽军  张志  秦松贤  蔡雄飞  顾延生  赵温霞 《地质学报》2003,77(2):187-193

江南古陆与华夏古陆拼接带北西侧前震旦纪地层中存在着近东西向褶皱叠加在早期近南北向褶皱上的现象,这是怀玉地块向西拼贴、华夏古陆向北西碰撞拼接过程中构造应力向陆内传递时形成的构造变形系统。叠加褶皱与拼接带具有成生联系,且各自代表了不同构造部位的变形特点。这一构造系统形成于前震旦纪,可能与格林威尔(Grenville)造山运动相当。  相似文献   

岳西菖蒲地区超高压变质带内的构造地层序列与叠加褶皱型式     

钱存超  汤加富  高天山 《大地构造与成矿学》2003,27(3):212-221

以大别造山带南部菖蒲地区为解剖区,结合区域地质调查分析,建立了包括浅变质岩层、超高压变质岩片在内的构造地层序列—岩片组合。对其组成特征、界面性质、形成时代、变形序列等,进行了较系统阐明,并对叠加褶皱型式及形成机制进行了讨论。  相似文献   

STRUCTURAL CHARACTERISTICS OF THE NIUSHOU MOUNTAIN AND ITS GEOLOGICAL SIGNIFICANCE IN CENTRAL NINGXIA     

ZHANGJin MAZongjin RENWenjun LEIYongliang 《大地构造与成矿学(英文版)》2003,27(1):165-178

There are many thrust-related structures occurring in the Paleozoic strata of the Niushou Mountain in the central part of Ningxia Hui Autonomous Region. The fault-related folds are the typical structures in this area. Based on the analysis about these structures and their relationships, the processes by which these structures of the Miboshan Formation were formed are reconstructed, and the strata underwent about three stages of deformation: (1) horizontal shortening, (2) folding, and (3) thrusting. And the fact that the Niushou Mountain is the leading edge of an old thrust sheet was proved, the Niushou Mountain, the Daluo Mountain and the Xiaoluo Mountain together constitute the front part of this old thrust zone, so the Niushou Mountain and the Ordovician strata in the central and southern parts of Ningxia now are likely allochthons. In the period from middle Ordovician to Devonian, the areas of the central and southern Ningxia belonged to the back-arc foreland basin of North Qilianshan orogen, which was adjacent to the continent in the north. In the later part of the early Paleozoic period, the Niushou Mountain was formed after the closure of the back-arc foreland basin.  相似文献